Barber chair chassis installation process.

The installation process of the barber chair chassis usually includes the following steps:

1. Prepare tools and materials:
-Barber chair chassis
-Chair body
-Fasteners such as screws, nuts, washers, etc.
-Installation tools such as wrenches and screwdrivers
-Lubricants that may be required

2. Inspect the chassis:
-Confirm that the chassis is not damaged or defective.
-Check whether the screw holes on the chassis are aligned with the connection points of the chair body.

3. Position the chassis:
-Put the chassis in the appropriate position, making sure it is aligned with the bottom of the chair body.
-Confirm that the chassis is positioned correctly so that the chair body can be connected smoothly.

4. Attach fasteners:
-Use screws and nuts to secure the chassis to the chair body.
-Make sure all screws are tightened, but not too tight to avoid damaging the threads.

5. Install the oil pump and adjustment mechanism (if the chassis includes these parts):
-Install the oil pump and adjustment mechanism according to the manufacturer's instructions.
- Make sure the oil pump and adjustment mechanism are installed correctly and can work smoothly.

6. Lubrication and Adjustment:
- Add lubricating oil to the oil pump and adjustment mechanism if necessary.
- Adjust the oil pump and adjustment mechanism to ensure that they can work smoothly.

7. Test Function:
- After installation, test the lifting and tilting functions of the chair to ensure that everything is working properly.
- Check for any unusual noises or malfunctions.

8. Cleaning and Tidying:
- Clean the work area to ensure that there are no tools or parts left behind.
- Wipe the chair to ensure that it is clean and dust-free.

9. Final Check:
- Perform a final check to ensure that all parts have been installed correctly and the chair is safe to use.

Please note that the specific installation steps may vary depending on the brand and model of the barber chair, so before installation, it is best to refer to the installation manual or instructional video provided by the manufacturer. If you encounter any problems, do not hesitate to contact the manufacturer's customer service for help.